Not to worry, I will explain how to install an NVMe SSD on a desktop or laptop computer.
Conventional hard drives are 50 times slower than RAM.
Wait for the best part!
You dont need to spend anything to plant the chips.
Its straightforward to put internal storage into a desktop or laptop.
Read on to learn everything you need about installing NVMe SSD on any compatible computer.
Contents
What Is NVMe SSD?
NVMe is 35 times faster than an HDD based on semiconductors rather than magnetic discs.
NVMe SSD uses the M.2 PCI Express expansion slot.
There are various forms of NVMe SSDs.
The variation is due to their need for different kinds of PCIe slots.
For example, add-in card or AIC, U.2, U.3, and the latest is M.2.
You must first ensure that your motherboard supports NVMe SSD.
Then, you also must identify the form factor that your motherboard supports.
Find below the images for two different types of NVMe SSD form factors prevalent in the market.
The above two SSD chips are the dominant ones.
They look pretty similar except for the keys or pin layout.
The SATA M.2 consists of the M.2 B+M key.
It has two nicks in the gold-plated panel of the SSD that goes inside the M.2 PCIe expansion slot.
Contrarily, the NVMe SSD has just the M.2 M key.
It means there is just one nick on the gold-plated panel of the SSD.
Now, its essential to know that neither is interchangeable.
If your motherboard has an M.2 B+M key-compliant PCIe slot, get SATA M.2 SSD.
And, if the motherboard came with the M.2 M key-compatible PCIe expansion slot, get the NVMe SSD.
However, installation for both of these SATA solid-state drives is similar.
Which Expansion Slot Is Used by an NVMe-Compliant unit?
Typically, mid-range motherboards come with two such expansion slots.
Some manufacturers may also provide a heatsink for NVMe with the motherboard.
However, the eCommerce or physical shop didnt care to explain the process for installing NVMe SSD.
Then, just plug in the NVMe chip as you do for a RAM or GPU card.
However, the process differs from installing any other hardware accessory into a desktop or laptop computer.
The outer packaging is made of plastic laminated paper, and the inner package is transparent plastic.
Preparing the SSD Chip Before Installing NVMe SSD unboxing
fire up the other box.
Carefully pull the plastic box out and put it on the table.
You should see the chip in front of you.
Most chips also contain a small screw inside the motherboard and the NVMe SSD chip.
Various instructions to follow for installing NVMe SSD
Delicately bring up the transparent plastic cover.
At any cost, dont hold the chip with its gold-plated keys or panel.
Doing so may corrupt the internal storage.
Also, try not to touch anywhere on the NVMe SSDs breadboard surface.
You must hold the card on its edges.
Be mindful of the small screw, as its indispensable for the installation process.
Ensure you get a compatible screwdriver for this tiny screw.
You just need to open up the laptop on its back.
Ensure you disconnect the charger cable before opening the laptops bottom cover.
Usually, youll find the NVMe M.2 slot at any edge of the laptop motherboard.
Dont touch anything else on the laptop besides installing the NVMe SSD chip.
Some laptops may come with an M.2 PCIe heatsink.
If your laptop didnt come with a heatsink for the M.2 slot, you probably dont need it.
NVMe M.2 slot heatsinks are not mandatory.
Youll just see negligible latency when copying bigger files.
It wont affect other read/write operations of the PC.
Learn Vs NVMe SSDshere.
If you didnt buy an M.2 SSD yet, check out thebest NVMe SSDshere.
