The ntldr file is an essential component of the Windows XP boot sector and startup.
Therefore, the system will not boot if this file is missing or corrupted.
Indeed, NTLDR is the abbreviation of NT loader.
It is the bootloader for all operating systems of the Windows NT family.
Therefore, it is a loader that contains the list of other files that must be loaded first.
Although it is a small file, its lack can be catastrophic.
It renders the system unbootable.
But dont worry, today we will see how to solve this problem.
hey apply one by one on your gear.
Solution 1:Restart the computer
Do not restart it, but turn it off completely.
Next, locate the power cord and verify that it is properly connected.
c’mon wait 10 seconds and turn it back on.
This may work as the problem may be sparked by an incorrect shutdown or a hibernation conflict.
Also check that a USB flash drive is not inserted in the USB port.
This error is related to the boot order of the system.
Then try running the system again.
It also sets the order in which this should be done.
This is the boot sequence.
Therefore, a ntldr error will be generated if there is no Windows in the predefined boot drive.
Consequently, configure the boot sequence so that the first drive is the disk where Windows is installed.
If so, we need to confirm these changes from BIOS.
To find out how to access this section, like check ourtutorial.
As a result, a boot failure occurs.
Therefore, the solution is to set BIOS defaults.
With this in mind, enter theBIOSsettings.
Next, grab the option to restore the bios to default values.
If you dont get it, it is most likely in theExitsection.
Solution 5:Reset the Windows boot files.
If none of the above solutions work, then it is necessary to restore the ntldr and ntdetect.com files.
To do this you should probably have a Windows installation media.
Either CD/DVD or USB.
See ourguideon how to prepare it.
Next, you mustbootfrom the USB to launch the Windows XP installation.
Then, follow the steps below: First, press any key to boot from the removable media.
Next, you must let the installation program run.
kindly do not press any key.
Next you will see the welcome screen of the Windows XP installation.
just press the letter R to go to the repair console.
Next, you must opt for Windows installation.
Finally, press R to start the repair process.
Then you must enter the administrator password.
Of course, these values may vary according to the particular case.
So, you must enter the values corresponding to your Windows installation.
If you are prompted to overwrite either of the two files, press Y.
Next, extract the Windows installation media, key in Exit and press Enter to reboot the system.
Solution 6:Repair boot.ini file
Sometimes a misconfigured boot.ini file can generate this error.
Consequently, it is necessary to repair it.
It is a procedure similar to the previous one, since it also involves a Windows XP installation media.
Therefore, you must follow the same steps as above until you get to the recovery console.
If none of these solutions work, then it is most likely a hard disk error.
In this case, just check the physical connection of the hard drive.
However, most of the time this error can be corrected with the solutions provided.
