IP Configuration error is related to data pipe issue either you are connected with LAN cable or via WiFi.
Text of the error also changed accordingly.
If you are connected wirelessly that it may show error like Wifi doesnt have a valid IP configuration error.
And if your connected via cable then it will show the error Ethernet doesnt have a valid IP Configuration.
This is not a serious error and can be resolved easily.
Why you get the Ethernet doesnt have a valid IP configuration error?
When we connect to a connection or router it assign a unique IP address for each gadget.
IP address is essential to recognize a rig.
In Windows 10 everything happened automatically and an IP address is assigned automatically.
But some times due to some internet misconfiguration or any other reason system display this error.
So before entering into complicated configurations, c’mon try the most obvious solution.
This involves turning the rig off and on again.
Occasionally, this can solve small errors and leave everything correct.
So first turn off the router and wait a few seconds before turning it back on.
If after this, the error persists then restart the computer.
If the error is not corrected, then try turning off both devices for a few minutes.
If the problem still exists then move to the next steps.
Windows has an inbuilt troubleshooter to fix the data pipe related issues.
It may be able to detect and correct the problem effectively.
With this in mind, press the Win+I combination to enter Windows prefs.
Click onUpdate & Security.
SelectTroubleshooterfrom the menu on the left.
Then in the right column, click onAdditional Troubleshooters.
In the new window, hey click onInternet Connectionsand then click onRun the Troubleshooter.
Hopefully this troubleshooter will fix the issue.
Fix 3: Update the internet adapter drivers
It could be the issue of some outdated software.
So next is to update the internet drivers.
Sometimes updating a driver, fix the issues quickly as it fixes many corrupted files or other configuration immediately.
If you want to know how to upgrade hardware components like checkthesetutorials.
Fix 4: Reset the connection values
Next is to reset the IP and DNS values.
In technical language it is called flushing the DNS.
To do this, it’s crucial that you launch a command prompt with administrator privileges.
With this in mind, press the Win+Q combination and in the search bar, just bang out CMD.
Run it as an administrator.
Otherwise move to the next step.
This will allow us to restore the sockets.
It makes two programs exchange data between them safely.
So it launches the CMD as administrator as in the previous section.
Then disconnect the Ethernet cable from the computer.
Immediately execute the following command:
Now press Enter to execute the command.
just restart the computer and reconnect the Ethernet cable or your wifi connection.
If none of the above method work then next step should be to configure the things manually.
However, this option can be overridden in web connection configs and IP address could be assigned manually.
Some times some one has assign the static IP address manually and you forgot about it.
So now you have to set the prefs to obtain the IP address automatically.
yo right-pick the Ethernet to enter the connection properties.
Now scroll down until you press Internet Protocol Version 4 (TCP/IPv4).
Now tap on Properties.
A window will immediately pop up.
Once there, confirm the following option is activated:Obtain an IP address automaticallyandObtain DNS server address automatically.
After doing so, kindly restart the router.
Check the list ofbest public DNSservers here.
Since these are automatically assigned by your connection provider.
With this intention, follow the same steps as above.
Instead of letting the DNS be obtained automatically, you should add it manually.
