Windows 10 has certainly improved its performance.

In fact, one of the reasons for its popularity is its ease of use.

In fact, you only need to start the system to enjoy a complete experience.

Article image

However, there are times when it fails to work.

One of these failures is related to the video adapter.

Specifically, the task bar displays a notification.

Article image

It is displayed textually:The Display driver has stopped responding and has successfully recovered.

Well, today we will see how to solve this failure that stops the video driver.

Close unnecessary programs

As mentioned, this problem is triggered by an overload of the graphics processing unit.

Article image

Therefore, having several programs and surfing app tabs open can collapse the GPU.

Consequently, generate the mentioned error.

just close all unnecessary programs and verify that the problem is solved.

Article image

Update the graphic driver

In many cases, this problem is due to an outdated driver.

Therefore, the solution is to update it.

If you dont know how to do it, yo check ourtutorial.

Article image

Adjusting visual effects for best performance

it’s possible for you to configure most of the Windows prefs.

Even the graphical aspect for better performance.

just follow the steps below:

If the problem persists, then you could try this solution.

Article image

What we will do is give a shot to increase the processing time of the GPU on the computer.

just note that you might edit the Windows registry.

So proceed with care.

Article image

Cleaning the graphics card.

The performance of a graphic card can gradually degrade.

One of the reasons for this is poor ventilation which can overheat it.

Article image

It is well known that more than 80 degrees Celsius is dangerous for the health of the gadget.

Therefore, you should turn off your machine.

Then open it and clean the fan, heat sinks and GPU.

To do this, it is convenient to use an air blower.

Very well, in this way we have seen several ways to eliminate this error.

Usually the causes are software malfunctions.

Sometimes it can be brought on by errors in the graphics card.

Therefore, you’d be smart to clean and maintain the equipment.