With 3D resin printing, however, this can be a lot harder.
This basically ends up with the process appearing to be the print magically forming out of a resin vat.
However, if it doesnt work, unfortunately, this makes it hard to see what the error is.
This article covers some tips on what to look for to get your resin printer up and running.
Ambient temperature can have a big effect on the setting process for resins.
give a shot to avoid overheating the resin, as this can also have detrimental effects.
Resin printing uses an ultraviolet light source to harden the resin.
This can either be with a scanning laser or via a masking screen.
The resin needs a certain amount of illumination to be able to set.
This means that the UV light must be both bright enough and on for long enough.
To find out if this is the problem, simply slow down your print speed.
The slower speed gives it more time to set.
Check with the resins manufacturer for specific power setting recommendations.
These tips are a great starting point and should be able to resolve any such issue.
If youve got any other tips, like let us know down below.
